Mario Mini open-source 3D printable parts

Mario25-O4Lite antenna mount (64D)

Mairo25-O4 LiteAntenna-mount( 64D）.stl

image.png

Mario25-O4Pro antenna mount (PLA+)

Mairo25-O4 ProAntenna-mount(PLA ）.stl

image.png

Mario25 side protective latch (64D)

Mario25-side-protective-latch(64D).stl

image.png

Mario25 outer shell latch (64D)

Mario25-outer-shell-latch(64D).stl

image.png

Mario25 capacitor mount (95A)

Mario25-capacitor-mount(95A).stl

image.png

Backpack version Bee25 hangar cover (provided by TOPFPV)

Backpack-version-Bee25-hangar-cover-(provided-by-TOPFPV).STL

image.png

Backpack version Bee25 hangar (provided by TOPFPV)

Backpack-version-Bee25-hangar-(provided-by-TOPFPV).STL

image.png

O4-to-Single-Port (64D) 2.stl

Please note: When using this printed part to mount the O4 Lite, stabilization cannot be achieved. It must be used together with four M2×2×3 heat-set threaded inserts.

image.png

Mario MiniX drone wing

MarioMiniX-drone-wing.stl

image.png

Mario MiniX 3S balance plug moun t (TPU95)( Requires M2×4 screws for mounting)

MarioMiniX-3S-balance-plug-mount(TPU95).stl

lQLPJxOHV0IUOxHNAljNAz6wNprIhQXCkXcJr0pnzY75AA_830_600.png

3D printed battery underslung pad(TPU64D，Used for battery protection. Normal freestyle flight is not recommended to use this, as it will affect the flight feel.)

3D-printed-battery-underslung-pad(TPU64D).STL

image.png

3D printed battery underslung pad(PLA，Used for battery protection. Normal freestyle flight is not recommended to use this, as it will affect the flight feel.)

3D-printed-battery-underslung-pad(PLA).STL

image.png