Master3X Factory Firmware and Configuration Files

5/26/25About 1 min

Firmware

betaflight_4.5.1_STM32F405_SPEEDYBEEF405AIO_be445fce.hex

Configuration

Master3X-Return-to-Home (RTH) Mode-dump .txt

Beginner Mode:

This mode is designed for new pilots just starting out. In Beginner Mode, the drone is locked in Angle (stabilized) mode — it cannot be switched to Horizon or Acro mode via the switch unless adjusted in Betaflight. Additionally, flight power and tilt angle are limited to make control smoother and reduce difficulty. This makes it easier for new users to control the drone during both LOS (line-of-sight) and FPV practice flights, offering a more beginner-friendly experience.Difference from Angle Mode:Compared to standard Angle mode, Beginner Mode adds limitations on flight power and tilt angle to further smooth out flight control and reduce operational difficulty.

Advanced Mode:

Intended for pilots with some flying experience or those who have logged solid practice in simulators and are ready to fly real drones. This mode enables full manual (Acro) control by default, unlocking the drone’s full performance potential.

Return-to-Home (RTH) Mode:

Built on Advanced Mode, this mode adds GPS functionality and preconfigured GPS return-to-home settings with optimized default parameters. It allows users to utilize the GPS RTH feature with minimal configuration, without affecting regular flight performance — it simply adds the convenience of a return function.