Skip to main content
SpeedyBee Knowledge Base
简体中文
English
01. Reasons for Unlock Failure and Solutions (BF Firmware)
Less than 1 minute
Catalog
Solution for "Arming Disabled [No Valid Receiver Signal Detected]"
Solution for "Arming Disabled: [ESC Protocol Not Configured]" error.
Solution for **Disabling Arming** When the Arm Switch is in an Unsafe Position
Solution for Preventing Arming When the Drone Is Not Level
Solution for Preventing Arming While Connected to the Configurator
Solution to "Arm Prohibited [Throttle Joystick in Unsafe Position]"
Solution to the issue of "Unlocking is prohibited [Failsafe switch is activated]"
Solution to the issue of "Unlocking is prohibited [GPS Rescue Mode is configured, but the required number of satellites is not reached]"
Solution to the issue of "Unlocking is prohibited [GPS Rescue Switch is in an unsafe position]"
Unable to Arm [Unable to Obtain Motor Speed Feedback, Resulting in RPM Filter Not Functioning
